How to Look

at a House


A blog with answers
to your questions about
HOME INSPECTION
and HOME MAINTENANCE

W.R. Grace & Co.


More blog posts about roofing:

  1. I’m buying a ‘50s house with a “gravel” roof. Is the roof going to be a problem.

  2. Should I buy a house that needs a new roof?

  3. What is the cost difference between asphalt shingle and metal roofing?

  4. What is the minimum pitch of an asphalt shingle roof?

  5. What’s the difference between a gable roof and a hip roof?

  6. What do you look for when you inspect a roof?

  7. What is roof pitch?

  8. What’s the difference between a roof inspection and a roofing estimate?

  9. I saw some staining on the ceiling. Do you think the roof is okay?

  10. What is a “cool roof”?

  11. Can metal roofing be used on a slow slope/pitch roof?

  12. How many layers of roofing are allowed on a home?

  13. How can I be sure my roofing contractor got a permit?

  14. What is the difference between plywood and OSB?

  15. What is the difference between galvanized and galvalume metal roofing?

  16. What is the minimum pitch for a metal roof?

  17. What does “lack of tab adhesion” in an asphalt shingle roof mean?

  18. What is an H-clip?

  19. Does it cost more to roof a hip roof than a gable roof?

  20. If my roof is not leaking, why does it need to be replaced?

  21. Is a ridge board/beam required for a roof framed with rafters?

  22. What causes a lump or dip in the roof?

  23. Why is a popped nail in a shingle roof a problem? How do I fix it?

  24. What can I do to prevent roof leaks?


More blog posts on related subjects:

  1. How can I tell if a house has insulation?

  2. What are the warning signs of a dangerous deck?

  3. Does it make sense to buy an older mobile home and remodel it?

  4. How do you determine when the house was built?

  5. Should I buy a fixer-upper?

  6. How do I remove cigarette odor in a house?

  7. The house has asbestos siding. What should I do?

  8. How do I get insurance if my home can’t pass a 4-point inspection?

  9. There’s an old fuel oil tank underground in the yard. Is it a problem?

  10. Why do the floors slope in this old house?

  11. The garage has been converted to a family room. Is that alright?

  12. When is a railing required for the edge of a deck or porch?

  13. What is the difference between a clip, single wrap, and double wrap for the wind mitigation form?

  14. What is a “continuous load path”?

  15. What are the different roof deck attachment discount categories for a wind mitigation inspection?

  16. Why is it a mistake to replace and roof not replace its flashings?

  17. What are roofing purlins and battens?

Welcome to our blog!
We want you to be an informed homebuyer, and each blog post is a question that we have answered for our friends and customers over the years. Hope they help you make a good choice for your next home.

    It is manufactured from polypropylene and polyethylene, which are used make a wide variety of other consumer products. Synthetic underlayments offer a number of advantages over roofing felts, such as tear resistance, UV resistance, and they don’t wrinkle when exposed to moisture like roofing felt. When it first began appearing on roofs in the mid-1980s, the multiple advantages made it a premium-price  product. But, as synthetic underlayment’s popularity and production has increased, the price has come down to become comparable to 30-lb. felt, and it will likely be the predominant roof underlayment in the years to come. Popular brands include RhinoRoof®, Grace Tri-Flex®, and Titanium UDL30®.



While we hope you find this series of articles about home inspection helpful, they should not be considered an alternative to an actual home inspection by a local inspector. Also, construction standards vary in different parts of the country and it is possible that important issues related to your area may not be covered here.
©2015 - McGarry and Madsen Inspection.

Click Below to Link
to Collections of
Blog Posts by Subject

Search This Blog